bitstream
Hyena Member
 |
# Posted: 18 Aug 2006 14:16
Salam... aku sgt newbie dlm FreeBSD & baru sahaja install FreeBSD 5.5-RELEASE kat laptop acer aspire 3641. masalah aku skrg ialah aku selalu dpt error ACPI. Ni aku post dmesg dari system tu...
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.5-RELEASE #0: Tue May 23 14:58:27 UTC 2006
root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/ GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz (1463.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE ,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,AC PI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 233439232 (222 MB)
avail memory = 218755072 (208 MB)
ACPI APIC Table: <PTLTD APIC >
ioapic0 <Version 2.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib3
ohci0: <OHCI (generic) USB controller> mem 0xd0005000-0xd0005fff irq 19 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0006000-0xd0006fff irq 19 at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0x8460-0x846f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci10: <ACPI PCI bus> on pcib4
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 0.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0210000-0xd02100ff irq 20 at device 1.0 on pci10
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:d3:45:ab:f0
pci10: <network, ethernet> at device 6.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1463010538 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57231MB <TOSHIBA MK6034GAX/AC101A> [116280/16/63] at ata0-master UDMA33
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.00> at ata0-slave PIO4
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
Mounting root from ufs:/dev/ad0s1a
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBST] (Node 0xc1492a80), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BST] (Node 0xc1492940), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xc1492aa0), AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xc1492960), AE_NO_HARDWARE_RESPONSE
mcm mana aku nak settle problem tu yer? thanx byk2...
|
